Rust removal with Ospho
(→Summary) |
(→Prepping Ospho for primer) |
||
| Line 34: | Line 34: | ||
==Prepping Ospho for primer== | ==Prepping Ospho for primer== | ||
| − | On exposed surfaces, sand the coating to give the epoxy something to bite into. If there was any streaking, you can sand a little more on those spots. | + | On exposed surfaces, sand the coating to give the [[epoxy primer]] something to bite into. If there was any streaking, you can sand a little more on those spots. |
Sand with 180 on a DA, when wipe off the grayish powder with wax and grease remover, then prime. | Sand with 180 on a DA, when wipe off the grayish powder with wax and grease remover, then prime. | ||
Your Privacy Choices