TH700R4 through 4L70E tips and tricks
m (→Pump modifications) |
m (→Pump modifications) |
||
| Line 58: | Line 58: | ||
Drill bit location to stake bushing. Pump bushing is removed for this operation. 1/4 inch drill bit works well here | Drill bit location to stake bushing. Pump bushing is removed for this operation. 1/4 inch drill bit works well here | ||
| + | |||
[[Image:Stakebush3.jpg]] | [[Image:Stakebush3.jpg]] | ||
| + | |||
This photo shows the small spot make with drill bit to stake the pump bushing in place. Does not need to be very deep. | This photo shows the small spot make with drill bit to stake the pump bushing in place. Does not need to be very deep. | ||
| + | |||
[[Image:Stakebush4.jpg]] | [[Image:Stakebush4.jpg]] | ||
| + | |||
| + | |||
| + | This photo shows the pump bushing edge dimpled into the location created with a drill bit. Use the side of a screw driver and hit it with a hammer to bend the bushing edge into the recess area | ||
| + | |||
| + | |||
| + | [[Image:Stakebush.jpg]] | ||
== Reference and reading material == | == Reference and reading material == | ||
Your Privacy Choices