TH400 rebuild tech
m |
(→Valve body mods, automatic shifts) |
||
| Line 41: | Line 41: | ||
You can plug the hole with a brass dowel or a check ball. To use a check ball you will have to first drill the hole larger and then drive the check ball in place. | You can plug the hole with a brass dowel or a check ball. To use a check ball you will have to first drill the hole larger and then drive the check ball in place. | ||
| + | Drill the marked holes at .125 for street use. | ||
| + | |||
| + | For a heavy duty application : 3rd gear shift use .150 drill and leave the 1-2 check ball out. Caution a 34 element sprag needs to used with the 1-2 check ball removed. | ||
| + | |||
| + | [[file:T-400feed-holes.jpg]] | ||
=Jakeshoe rebuild tech:= | =Jakeshoe rebuild tech:= | ||
Your Privacy Choices