Torque converter lock up control 700R4
m (trying to finish up this) |
m (still working out the kinks) |
||
| Line 1: | Line 1: | ||
{{youcanedit}} | {{youcanedit}} | ||
| + | |||
| + | =Converter lock up wiring= | ||
| Line 10: | Line 12: | ||
[[Image:Diagram_no_tow.jpg]] | [[Image:Diagram_no_tow.jpg]] | ||
| + | |||
| + | This is a common 12 volt circuit. 12 volts to the solenoid and you need a ground to complete the circuit. If you do not understand basic wiring, get some help from some person with the knowledge. | ||
[[image:700_connectors.jpg]] | [[image:700_connectors.jpg]] | ||
| + | Pressure switches: | ||
| + | |||
| + | Notice these are silver in color. This means they are NO = Normally Open. When pressure is applied the switch closes the internal contacts to complete the circuit. | ||
| + | |||
| + | |||
| + | [[Image:700_pressure_switches.jpg]] | ||
| + | |||
| + | ==Solenoids== | ||
| − | Solenoid designs: 1 wire and common 2 wire | + | Solenoid designs: 1 wire and common 2 wire. Solenoid on the left has 1 red wire. this is a self grounding lock up solenoid. The 2 wire solenoid has a red wire and a black wire. Red is for 12 volts, black is for ground. |
[[image:700_solenoid_wires.jpg]] | [[image:700_solenoid_wires.jpg]] | ||
Your Privacy Choices