DynoSim combinations
| Line 194: | Line 194: | ||
http://www.gregsengine.com/converti...ads-to-400.html | http://www.gregsengine.com/converti...ads-to-400.html | ||
Use a composition gasket that compresses to 0.039" or 0.040". With the zero deck of the block, this will put the piston crown at 0.039" to 0.040" from the underside of the cylinder head with the piston at TDC. This establishes your "squish" dimension at 0.039" or 0.040", which will optimize the motor for detonation-free operation on pump gas. | Use a composition gasket that compresses to 0.039" or 0.040". With the zero deck of the block, this will put the piston crown at 0.039" to 0.040" from the underside of the cylinder head with the piston at TDC. This establishes your "squish" dimension at 0.039" or 0.040", which will optimize the motor for detonation-free operation on pump gas. | ||
| + | |||
| + | |||
| + | Here's one I put together for a nice little street cruiser motor running on cheapo pump gas.... | ||
| + | I might be thinkin' 375-400 horsepower, 425+ lbs/ft of torque with 9.0:1 static compression ratio, stock converter, mild cam (204-212 intake duration @0.050", 110 LSA), RPM intake, 750 carb, 1 5/8" long-tube headers and 3.50 rear gear. Just a real nice cruiser. I really, really like these heads. They're inexpensive and they work. This is for one bare head.... | ||
| + | http://www.competitionproducts.com/...tinfo/RHS12407/ | ||
| + | Then buy one valve kit (fills 2 heads)... | ||
| + | http://www.competitionproducts.com/...oductinfo/8511/ | ||
| + | One guide plate kit (fills 2 heads)... | ||
| + | http://www.competitionproducts.com/...ctinfo/42151-8/ | ||
| + | And one rocker stud kit (fills 2 heads).... | ||
| + | http://www.competitionproducts.com/...tinfo/134-7101/ | ||
| + | Here's the cam... | ||
| + | http://www.summitracing.com/parts/HRS-110315-10/ | ||
| + | or here... | ||
| + | http://www.competitionproducts.com/...info/110315-10/ | ||
| + | And here are the roller lifters... | ||
| + | http://www.summitracing.com/parts/HRS-91164N/ | ||
| + | or here... | ||
| + | http://www.competitionproducts.com/...ductinfo/91164/ | ||
| + | Use a Howards composite distributor gear (will outlast a bronze gear 3 to 1)... | ||
| + | http://www.competitionproducts.com/...ductinfo/94402/ | ||
| + | |||
| + | RPM HP TQ | ||
| + | 2000 148 390 | ||
| + | 2500 188 395 | ||
| + | 3000 238 417 | ||
| + | 3500 292 439 | ||
| + | 4000 342 449 | ||
| + | 4500 379 442 | ||
| + | 5000 401 421 | ||
| + | 5500 400 382 | ||
| + | 6000 355 310 | ||
| + | Cam installed retarded 2 degrees. | ||
| + | |||
Your Privacy Choices