Ford 9-inch rear ends
m |
|||
| Line 3: | Line 3: | ||
== Alterations of nine inch == | == Alterations of nine inch == | ||
| − | In order to install a pre-load brace, you will have to build a strong fixture to hold the housing while you apply force to the housing ends. You can | + | In order to install a pre-load brace, you will have to build a strong fixture to hold the housing while you apply force to the housing ends. You can begin by purchasing 3-inch 1/4 or 3/8 wall tubing and cutting it to two pieces of six foot lengths. Cut a square piece of 1/2 inch plate @ 16 X 16 inches, place the center section over the plate and mark out the bolt pattern, go to the drill press after center punching the bolt centers on the plate, drill out the holes to 7/16 inches. |
[[File:Brace_in_place.jpg]] | [[File:Brace_in_place.jpg]] | ||
Your Privacy Choices