Ford C4 transmissions
(Format photos, text; clean up.) |
m |
||
| Line 30: | Line 30: | ||
This view shows the rear roller clutch and race installed. The rollers have accordion style springs that push the rollers towards the race. You set the race in place first. Set the rollers in place next, and install the springs last. Watch the spring install as sometimes they like to turn sideways at one end. | This view shows the rear roller clutch and race installed. The rollers have accordion style springs that push the rollers towards the race. You set the race in place first. Set the rollers in place next, and install the springs last. Watch the spring install as sometimes they like to turn sideways at one end. | ||
| + | |||
[[file:C-4_build_-_09.jpg|frame|none|View from top looking at low roller clutch with race installed. Rear band with struts in place.]] | [[file:C-4_build_-_09.jpg|frame|none|View from top looking at low roller clutch with race installed. Rear band with struts in place.]] | ||
Snap ring installed on the output shaft. Snap ring sets on top of the rear ring gear before the rear planet is installed. This retains the shaft into the transmission. If the snap ring will not go into the groove, recheck the parts installation to resolve the clearance problem. | Snap ring installed on the output shaft. Snap ring sets on top of the rear ring gear before the rear planet is installed. This retains the shaft into the transmission. If the snap ring will not go into the groove, recheck the parts installation to resolve the clearance problem. | ||
| − | [[file:C-4_build_-_14.jpg]] | + | |
| + | [[file:C-4_build_-_14.jpg|frame|none|snap ring shown installed]] | ||
Thrust washer installed on rear planetary unit, a little assembly grease can hold it in place. | Thrust washer installed on rear planetary unit, a little assembly grease can hold it in place. | ||
| + | |||
[[file:C-4_build_-_15.jpg|none|frame|Thrust washer installed on rear planetary.]] | [[file:C-4_build_-_15.jpg|none|frame|Thrust washer installed on rear planetary.]] | ||
| − | In this photo the rear part of the gear train is installed. This includes the band with apply struts, the rear planet, and ring gear (under the planet) | + | In this photo the rear part of the gear train is installed. This includes the band with apply struts, the rear planet, and ring gear (under the planet) |
| + | |||
[[file:C-4_build_-_24.jpg]] | [[file:C-4_build_-_24.jpg]] | ||
Your Privacy Choices