Torque converter lock up control 700R4
m (senergy added) |
|||
| Line 5: | Line 5: | ||
==Basic wire diagram== | ==Basic wire diagram== | ||
| − | + | This is a simple 12 volt circuit. 12 volts to the solenoid and you need a ground to complete the circuit. If you do not understand basic wiring, get some help from someone with transmission / automotive wire knowledge. | |
| − | |||
| + | When the brakes are applied the relay switches to pin 87 and the circuit is broken, this cancels the 12 volts to the transmission. The converter clutch is then unlocked. | ||
| − | + | Common type Bosch relay used. | |
| − | + | [[Image:Diagram_no_tow.jpg]] | |
==Pressure switches== | ==Pressure switches== | ||
Your Privacy Choices