TH350 rebuild tech
| Line 126: | Line 126: | ||
[[file:T-350_center_support.jpg|frame|none|Center support, inner race, thrust washer shown.]] | [[file:T-350_center_support.jpg|frame|none|Center support, inner race, thrust washer shown.]] | ||
| − | Next you install the 4-tang thrust washer into the large splines of the low sprag inner race (picture above), and then the sun shell and gear assembly. Before this step, for HD use, you would have wanted to install additional sun gear bushings, 2 on each end, and re-drilled the lube holes as shown below. | + | Next you install the 4-tang thrust washer into the large splines of the low sprag inner race (picture above), and then the sun shell and gear assembly. Before this step, for HD use, you would have wanted to install additional sun gear bushings, there is then 2 bushings on each end, and re-drilled the lube holes as shown below. |
[[file:T-350_sun_gear_bush.jpg|frame|none|Double bushings installed. You MUST drill oil holes in bushings.]] | [[file:T-350_sun_gear_bush.jpg|frame|none|Double bushings installed. You MUST drill oil holes in bushings.]] | ||
Your Privacy Choices