Porting cylinder heads
(Format, add text, image) |
(Add image) |
||
Line 35: | Line 35: | ||
===Gasket Matching=== | ===Gasket Matching=== | ||
+ | [[File:DYKUM BLUE TUBE 001.jpg|thumb|100px|Dykum blue layout dye]] | ||
This is a simple process whereby we will match thermostat housing to an intake manifold for better flow of coolant from the engine to the radiator. Begin by cleaning off the surface of both housing and intake mating surfaces. Remove all gasket material and glue with acetone and a gasket scraper. True the surface of slight imperfections by using a mill/bastard file place flat on the gasket surface working the file back and forth. The shiny sports are the highs and the dull ones are the lows, true these surfaces. When a flat surface is obtained,paint the surface with Dykem dye, lay a new gasket on the surface and insert the bolts in the holes of the intake to center the gasket over the openings. With a scribe, scratch along the gasket edge around the opening. When complete, remove bolts and gasket. This will reveal a scribed line in the purple dye that you will be enlarging up the opening to. | This is a simple process whereby we will match thermostat housing to an intake manifold for better flow of coolant from the engine to the radiator. Begin by cleaning off the surface of both housing and intake mating surfaces. Remove all gasket material and glue with acetone and a gasket scraper. True the surface of slight imperfections by using a mill/bastard file place flat on the gasket surface working the file back and forth. The shiny sports are the highs and the dull ones are the lows, true these surfaces. When a flat surface is obtained,paint the surface with Dykem dye, lay a new gasket on the surface and insert the bolts in the holes of the intake to center the gasket over the openings. With a scribe, scratch along the gasket edge around the opening. When complete, remove bolts and gasket. This will reveal a scribed line in the purple dye that you will be enlarging up the opening to. | ||