General Motors transmissions

Jump to: navigation, search
m (3-speed manual overdrive units)
(Add image)
Line 27: Line 27:
  
 
When you wire in a toggle switch to operate the relay to power the solenoid you could shift it into overdrive in any gear and not have to be above the governor speed in first gear. Just like driving a big truck with a two speed rear end. Just remember you have to let up on the gas to let it shift up into overdrive and when you turn off the switch you also have to let up on the gas to let the spring retract the solenoid to shift out of overdrive. If you leave the switch on and are in overdrive you can not shift into reverse and you cannot roll backwards.
 
When you wire in a toggle switch to operate the relay to power the solenoid you could shift it into overdrive in any gear and not have to be above the governor speed in first gear. Just like driving a big truck with a two speed rear end. Just remember you have to let up on the gas to let it shift up into overdrive and when you turn off the switch you also have to let up on the gas to let the spring retract the solenoid to shift out of overdrive. If you leave the switch on and are in overdrive you can not shift into reverse and you cannot roll backwards.
 +
 +
===Borg Warner OD wiring diagram===
 +
[[File:Od-wiringdiagrm.jpg]] <br style="clear:both"/>
  
 
===Rebuilding the Borg Warner overdrive===
 
===Rebuilding the Borg Warner overdrive===

Revision as of 20:02, 1 May 2012

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox