Talk:Transmission holding fixtures
| Line 77: | Line 77: | ||
::Chris--[[Special:Contributions/98.198.153.123|98.198.153.123]] 12:27, 31 August 2012 (MDT) | ::Chris--[[Special:Contributions/98.198.153.123|98.198.153.123]] 12:27, 31 August 2012 (MDT) | ||
| + | |||
| + | :::There was no grief caused, only some concern over how the fixture worked in a practical, real-world setting as opposed to the rendering that was submitted that left questions as to the "how" of it all. FWIW, the original text and images were left intact for some time after the concerns were initially raised in the hopes that you'd see the request left on your [[http://www.crankshaftcoalition.com/wiki/User_talk:Neighbors user discussion page]] for further discussion. In that this wasn't forthcoming (I realize you have other things to deal with- as we all do), the call was made to set the fixture text and images aside until you responded. Now that you have responded I see no reason the section cannot be returned to the article once it's seen or explained just how it holds the case, etc. | ||
| + | |||
| + | :::BTW, disregard if you already understood this, but the reference above about my concern using a cracked case wasn't about using one in service, my concern was in using a cracked case for a transmission stand. In my opinion the crack- located as it is in the photo below- could well spread and drop everything onto the floor- or onto someone. | ||
| + | :::[[File:C4 trans build.jpg]] | ||
| + | :::--[[User:Cobalt327|Cobalt327]] 13:35, 31 August 2012 (MDT) | ||
Your Privacy Choices