Ford engine specifications
(Add table) |
(Clean up) |
||
| Line 66: | Line 66: | ||
*3/8" rod bolts | *3/8" rod bolts | ||
*Screw in rocker studs w/mechanical lifter camshaft | *Screw in rocker studs w/mechanical lifter camshaft | ||
| − | *Dual point distributor | + | *Dual point distributor without vacuum advance |
| − | *Heads have two dots cast above "289", non hipo heads have one dot. Have screw in studs without guide plates and valve spring cups cast into the head. Both small (10.5:1 cr 1963-'65) and large (10:1 cr, 1966-'67) chamber heads were used w/either 1.67" or 1.78" intake valves. | + | *Heads have two dots cast above "289", non hipo heads have one dot. Have screw in studs without guide plates and valve spring cups cast into the head. Both small (10.5:1 cr 1963-'65) and large (10:1 cr, 1966-'67) chamber heads were used w/either 1.67" (before 4/64) or 1.78" (4/64 to '67) intake valves. All exhaust valves were 1.45". |
| − | * | + | *Autolite 4100 480 cfm four-barrel carburetor on a cast iron intake manifold |
*271 horsepower at 6,000 rpm and 312 ft/lb torque at 3400 rpm | *271 horsepower at 6,000 rpm and 312 ft/lb torque at 3400 rpm | ||
*Better flowing cast iron exhaust manifolds | *Better flowing cast iron exhaust manifolds | ||
Your Privacy Choices