Rocker arms
(Add text, image) |
(→Self aligning vs. non self aligning) |
||
| Line 35: | Line 35: | ||
===Self aligning vs. non self aligning=== | ===Self aligning vs. non self aligning=== | ||
[[File:SA vs non sa rockers.jpg]] | [[File:SA vs non sa rockers.jpg]] | ||
| + | |||
| + | ==Installing screw in rocker arm studs== | ||
| + | [[File:POW351300.jpg|thumb|400px|left|Stud puller/tap guide for SBC]] <br style="clear:both"/> | ||
| + | |||
| + | When screw in studs are going to be installed, the stud boss will usually need to be machined shorter to make up for the thickness of the guide plate (if used) and for the hex portion of the stud and the radius between the hex and the stud. In the case of the early style SBC, 0.400" is usually a safe amount to remove, but this can vary some depending on the exact parts used. | ||
==Converting a non-adjustable valve train== | ==Converting a non-adjustable valve train== | ||
Your Privacy Choices