The FREE T Bucket plans
(→Pedal Assemblies) |
|||
| Line 158: | Line 158: | ||
One of the most overlooked aspects of building a T Bucket is seating position and location of controls. Many a T Bucket builder has spent many years and many dollars building their dream machine only to have it sit in the garage because it is too uncomfortable to drive. Try not to limit yourself because you just happen to have a certain steering box or seat. These cars have a pretty small cockpit and there's not much room for controls. If your going to have a traditional style bucket with the steering column though the floor, be very careful that you have plenty of room for your knees and you'll be able to operate the gas and brake pedals. The best way is to mock up everything and make sure your final setup will work for you, especially if you are taller than 5'-8 or so. One trick is to locate the gas pedal over the transmission hump. This allows you to stretch out your right leg a bit and be more comfortable. | One of the most overlooked aspects of building a T Bucket is seating position and location of controls. Many a T Bucket builder has spent many years and many dollars building their dream machine only to have it sit in the garage because it is too uncomfortable to drive. Try not to limit yourself because you just happen to have a certain steering box or seat. These cars have a pretty small cockpit and there's not much room for controls. If your going to have a traditional style bucket with the steering column though the floor, be very careful that you have plenty of room for your knees and you'll be able to operate the gas and brake pedals. The best way is to mock up everything and make sure your final setup will work for you, especially if you are taller than 5'-8 or so. One trick is to locate the gas pedal over the transmission hump. This allows you to stretch out your right leg a bit and be more comfortable. | ||
| + | |||
| + | This is Reason 2 for buying the body and deck or bed before you begin work on a frame for your car. Mock up everything in wood, cardboard, etc. before making the final cuts and welds and assemblies. You won't regret it. | ||
==Shifter Assemblies== | ==Shifter Assemblies== | ||
Your Privacy Choices