Steering shaft assemblies from junkyard parts
(→Double D steering shafts and tubes) |
|||
| Line 44: | Line 44: | ||
This shows the complete setup. All that needs to be done is to weld or bolt the piece of pipe that holds the Heim Joint to the frame. The reason for the Heim Joint is that the steering column bearing used on the outside of the firewall to help support everything isn't a snug fit, and this is one place that overkill is a good idea. | This shows the complete setup. All that needs to be done is to weld or bolt the piece of pipe that holds the Heim Joint to the frame. The reason for the Heim Joint is that the steering column bearing used on the outside of the firewall to help support everything isn't a snug fit, and this is one place that overkill is a good idea. | ||
[[Image:complete_steering_joint_assembly.jpg|frame|none|The finished steering shaft assembly.]] | [[Image:complete_steering_joint_assembly.jpg|frame|none|The finished steering shaft assembly.]] | ||
| + | |||
| + | '''When using someone else's photographs and work, credit to that person should be given.''' '''This is NOT the work of the author.''' | ||
Your Privacy Choices