First paint job

Jump to: navigation, search
(General Tips, Tricks, and Techniques)
(General Tips, Tricks, and Techniques)
Line 22: Line 22:
 
One way to turn your garage into a temporary paint booth is to get huge plastic dropclothes from you local hardware store or home improvement store. They are cheap and effective for protecting your tool boxes, "toys"(Atv's, bicycles, Motorcycles, etc.) from overspray.  
 
One way to turn your garage into a temporary paint booth is to get huge plastic dropclothes from you local hardware store or home improvement store. They are cheap and effective for protecting your tool boxes, "toys"(Atv's, bicycles, Motorcycles, etc.) from overspray.  
 
Open up your garage door about 1/8 to a 1/4 way up, thgis will help with ventilation, since solvents sink. Place a fan near the opening, facing outside, to help even more with airflow. Opening any side doors and roof vents helps lots too, Place another fan around here. (old box fans work best) Box fans can be found for very cheap at second-hand stores.
 
Open up your garage door about 1/8 to a 1/4 way up, thgis will help with ventilation, since solvents sink. Place a fan near the opening, facing outside, to help even more with airflow. Opening any side doors and roof vents helps lots too, Place another fan around here. (old box fans work best) Box fans can be found for very cheap at second-hand stores.
 +
 +
'''Basic mixing tecniques'''
 +
 +
Paint and related finishing products can be mixed in glass measuring cups, medicine cups, soup cans, or shot glasses. However, EZ Mix cups are generally preferred for ease of use. Containers with measurements on the side are generally most useful. Paper cups are cautioned against because some may have a wax coating. Similarly, plastic cups or containers (medicine cups, yogurt containers, cleaned bottle caps, etc.) are also cautioned against. There are many different kinds of plastic, some of which are inappropriate for storing certain types of finishing products.
 +
When mixing double portions of paint or primer, mix one portion at a time. For example,''''' 8:2:1''''' is easier to keep track of than '''''16:4:1'''''. After mixing each individual portion, add the two portions together and mix well again. This also cuts down on wasted material when you make a mistake (too much hardener, wrong reducer, etc.).
 +
 +
GREAT TIP'''When opening a can of paint, punch a few holes in the trough where the lid sits. That way, excess paint will drain out of the trough and into the can, rather than splattering when placing the lid back on the can.''' Buy a set of inexpensive spatulas to use as scrapers for paint cans.
 +
To preserve hardener, displace the air in the can with inert gas, such as that from a welding tank. Or, use a commercial inert gas finish preservative such as Bloxygen.
 +
For easier pouring, affix a 2-inch piece of masking tape to the edge of a large gallon of paint. Pour the paint over the piece of tape.
 +
Use a ladle for handling paint.
 +
When purchasing new paint or other finishing products, write the date on them with black magic marker.
 +
For stirring paint, use inexpensive "jumbo sticks", tongue depressors, Popsicle sticks, wood sticks, or butter knives.
 +
GREAT TIP'''Paint stirring sticks with marks for different mix ratios can be useful for mixing paint.'''
 +
When opening a gallon of paint that isn't all going to be used immediately, mix it very well and pour it off into quart cans. While pouring, intermix the paint; pour a little bit into each can at a time.
 +
Leftover paint with hardener can be placed in the refrigerator. The cold temperature will slow down the hardener.
  
 
== Proper Clothing and Protection ==
 
== Proper Clothing and Protection ==

Revision as of 20:24, 12 February 2007

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox