Troubleshooting ignition

Jump to: navigation, search
m (Add categories)
m (Spell correction)
Line 3: Line 3:
  
 
==Checking voltage and ground==
 
==Checking voltage and ground==
First, perform a basic test for power and ground at the points: Distributor cap off, points open, ignition ON. Confirm there is battery voltage at movable contact side of the points set. If there is, next confirm the stationary side of the points set is grounded.
+
 
  
 
'''1.''' Connect the test light ground clip to a good ground or directly to the negative battery terminal.  
 
'''1.''' Connect the test light ground clip to a good ground or directly to the negative battery terminal.  

Revision as of 15:28, 24 August 2013

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox