Vortec L31 cylinder head
(→Overview) |
(→Upgrading and compatibility) |
||
| Line 194: | Line 194: | ||
* 1987 to present center bolt style valve covers if the heads used previously were perimeter style (1986 and earlier including the current production Goodwrench 350 crate motor) | * 1987 to present center bolt style valve covers if the heads used previously were perimeter style (1986 and earlier including the current production Goodwrench 350 crate motor) | ||
** Note: [http://www.crankshaftcoalition.com/wiki/Vortec_L31_cylinder_head#Small_port_Vortec_head_p.2Fn_25534351_.28bare.29_and_p.2Fn_25534421_.28assembled.29 GMPP small and large port Vortec heads] and other aftermarket Vortec heads accept either perimeter or center bolt valve covers [[File:Vortec valve-rocker.jpg|thumb|right|300px|Self aligning stamped steel rockers]] | ** Note: [http://www.crankshaftcoalition.com/wiki/Vortec_L31_cylinder_head#Small_port_Vortec_head_p.2Fn_25534351_.28bare.29_and_p.2Fn_25534421_.28assembled.29 GMPP small and large port Vortec heads] and other aftermarket Vortec heads accept either perimeter or center bolt valve covers [[File:Vortec valve-rocker.jpg|thumb|right|300px|Self aligning stamped steel rockers]] | ||
| − | *Self aligning rocker arms | + | *Self aligning rocker arms (SBC and 4.3L since the 1988 model year use the self aligning rockers and the pushrod holes are round instead of oblong - self aligning rockers do retrofit to the earlier heads but recommended for a stock rebuild |
| − | * Valve cover gaskets | + | * Valve cover gaskets (again 87+ centerbolt style) |
| − | * Vortec specific intake manifold. While some aftermarket heads have both 12 and 8 bolt intake bolt patterns, the height of the Vortec ports require a tall, "raised port" type early intake manifold (along with porting/port work to the intake manifold and/or head), to even come close to fitting correctly. See '''[[Vortec_L31_cylinder_head#Using an early style intake on an aftermarket Vortec-type head|Using an early style intake on an aftermarket Vortec-type head]]''' for more info | + | * Vortec specific intake manifold. While some aftermarket heads have both 12 and 8 bolt intake bolt patterns, the height of the Vortec ports require a tall, "raised port" type early intake manifold (along with porting/port work to the intake manifold and/or head), to even come close to fitting correctly. See '''[[Vortec_L31_cylinder_head#Using an early style intake on an aftermarket Vortec-type head|Using an early style intake on an aftermarket Vortec-type head]]''' for more info; some applications require the stock SBC intake to have the upper section rewelded with a chunk of metal which covers the intake ports as demonstrated with the SyTy 4.3L or TPI intake base (it is common for the SyTy 4.3L lower intake to be modified with extra material when used with Vortec heads) |
* Vortec specific intake manifold gasket | * Vortec specific intake manifold gasket | ||
* Vortec specific intake manifold bolts | * Vortec specific intake manifold bolts | ||
Your Privacy Choices