Torque converter lock up control 700R4
m (Add/delete category) |
|||
| Line 1: | Line 1: | ||
| − | + | ||
==Converter lock up wiring== | ==Converter lock up wiring== | ||
This requires a simple 12 volt circuit. 12 volts to the solenoid and a ground to complete the circuit. When the brakes are applied the relay switches to pin 87 and the circuit is broken, thus unlocking the torque converter. A common Bosch-type relay used. | This requires a simple 12 volt circuit. 12 volts to the solenoid and a ground to complete the circuit. When the brakes are applied the relay switches to pin 87 and the circuit is broken, thus unlocking the torque converter. A common Bosch-type relay used. | ||
Your Privacy Choices