Installing brakes
From Crankshaft Coalition Wiki
| Line 24: | Line 24: | ||
The new pads need to slide freely in the caliper or on the mount. Rust can be removed with a file or wire brush if needed. Never grind the pads to fit. | The new pads need to slide freely in the caliper or on the mount. Rust can be removed with a file or wire brush if needed. Never grind the pads to fit. | ||
| − | [[File: | + | [[File:Cl |
| + | |||
| + | |||
Open the bleeder and push the cylinder back into the caliper until it is flush, you can use a caliper tool, a clamping vise grip (right), or a c-clamp to accomplish this, then close bleeder. | Open the bleeder and push the cylinder back into the caliper until it is flush, you can use a caliper tool, a clamping vise grip (right), or a c-clamp to accomplish this, then close bleeder. | ||
<br style="clear:both"/> | <br style="clear:both"/> | ||
| Line 42: | Line 44: | ||
Road test vehicle. | Road test vehicle. | ||
| − | |||
| − | |||
Your Privacy Choices