The FREE T Bucket plans
(→Steering assembly) |
(→Frame) |
||
| Line 31: | Line 31: | ||
==Frame== | ==Frame== | ||
"Where you have essentially two body groups 23-25 and 26-27, frame designs are all over the map. Many early Buckets were built on modified stock T frames or Model A frames. Others were built on early Chevy rails, or even channel iron frames. The "modern" T is usually sitting on a 2X3 or 2X4 ,.120-.180 wall thickness rectangular box tubing frame with a 2.5-3" tubular front cross member. | "Where you have essentially two body groups 23-25 and 26-27, frame designs are all over the map. Many early Buckets were built on modified stock T frames or Model A frames. Others were built on early Chevy rails, or even channel iron frames. The "modern" T is usually sitting on a 2X3 or 2X4 ,.120-.180 wall thickness rectangular box tubing frame with a 2.5-3" tubular front cross member. | ||
| − | Some frame makers make their frames one width front to back like a stock T frame, others have a frame that tapers from the rear to the front similar to a Model A frame. And others have other ideas." Excerpts from soon-to-be-released bucket book by Pasadenahotrod | + | Some frame makers make their frames one width front to back like a stock T frame, others have a frame that tapers from the rear to the front similar to a Model A frame. And others have other ideas." Excerpts from soon-to-be-released bucket book by Pasadenahotrod who is hijacking this wiki info for personnel profit! |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
==Front suspension== | ==Front suspension== | ||
Your Privacy Choices