Rust
(→References) |
(→Underside rust removal) |
||
| Line 74: | Line 74: | ||
Another option is to keep the car low to the ground, and, with plastic sheeting and duct tape, seal the area between car and floor. Leave the rear area of the plastic "tent" open for access. At the front of the "tent", affix a shop vac hose (exhaust). Blast. | Another option is to keep the car low to the ground, and, with plastic sheeting and duct tape, seal the area between car and floor. Leave the rear area of the plastic "tent" open for access. At the front of the "tent", affix a shop vac hose (exhaust). Blast. | ||
| + | |||
| + | |||
| + | ===Body filler to bare metal=== | ||
| + | It's a common procedure to apply body filler to bare metal, but it's not the "best" way to do it. User "badbob" on the HRBB says: "fillers get applied over bare metal every day and it's an acceptable recomended procedure, but applying a quality epoxy primer first adds corrosion resistance, durability, adhesion, and filler flexability. It just takes more time. Time that most people aren't willing to spend." | ||
===How to seal insides of doors?=== | ===How to seal insides of doors?=== | ||
Your Privacy Choices