Make a fiberglass fan shroud
(→Laminating the part) |
|||
| Line 86: | Line 86: | ||
===Laminating the part=== | ===Laminating the part=== | ||
| − | + | To laminate the part, you will need the following: | |
| + | |||
| + | *china bristle brushes | ||
| + | *acetone | ||
| + | *cans for mixing resin and holding acetone for washing your hands and tools | ||
| + | *scissors | ||
| + | *resin | ||
| + | *catalyst | ||
| + | *fiberglass mat | ||
| + | *cardboard | ||
| + | *latex gloves | ||
As the scope of this article is primarily intended to show one way to construct a part using the foam buck method, it will assume that you have a basic knowledge of laminating with fiberglass. Follow all instructions provided with your materials in regard to proper catalyzation of the resin and storage and handling of your tools and materials. | As the scope of this article is primarily intended to show one way to construct a part using the foam buck method, it will assume that you have a basic knowledge of laminating with fiberglass. Follow all instructions provided with your materials in regard to proper catalyzation of the resin and storage and handling of your tools and materials. | ||
Your Privacy Choices