Rust

Jump to: navigation, search

@@ Line 381: / Line 381: @@
 Is generally considered to be a poor choice for most automotive applications. Good for cheap shop shelving, etc.
-===Underside rust removal===
-Best not to do this as overhead work. Tilt the car on a rotisserie, or raise it significantly overhead.
-Another option is to keep the car low to the ground, and, with plastic sheeting and duct tape, seal the area between car and floor. Leave the rear area of the plastic "tent" open for access. At the front of the "tent", affix a shop vac hose (exhaust). Blast.

Revision as of 18:34, 13 July 2007