Rust, pitted

Jump to: navigation, search

@@ Line 37: / Line 37: @@
 ==Filling in the pits==
-Now that the rust has been removed, the pitted area of bare metal has to be filled. First, clean with a wax and grease remover ''(confirm this, and add other cleaning options here)''.
+Now that the rust has been removed, the pitted area of bare metal has to be filled. First, clean with a wax and grease remover ''(confirm this, and add other cleaning/coating options here)''. Then, the pits are typically filled by priming with a high-build primer, several of which are listed below. Generally, the less product used, the better. However, it may be necessary to repeatedly prime and block sand to fill the pits.
-Once the panel is clean, the pits can be filled with the following:
+===High-build primers and related products===
 *[http://www.evercoat.com/productDetail.aspx?pID=171 Evercoat FeatherFill G2]
 *[http://www.evercoat.com/productDetail.aspx?pID=70 Evercoat FeatherFill]

Revision as of 12:41, 4 August 2007