Cold air intakes
m (Reverted edits by 217.172.56.131 (Talk); changed back to last version by 65.208.11.138) |
|||
| Line 34: | Line 34: | ||
Cold air intakes are used in applications where the owner/operator feels that the vehicle will produce more power with an outside air charge. Huge misconception, cold air intakes do not produce more power, at least not power that you will feel in the seat of your pants. Most vehicles built today are set up pulling air in from the outside, not from the engine compartment. If you notice that the air filter housing/box is located on one side or the other of the engine compartment, and has ducting that goes through the inner fender. Thus, this is pulling in outside air. It seems that most aftermarket cold air intake kits include the ducting that is smooth, not ribbed or corrilated, this allows for less disruption of the airflow, which in most cases is a heck of a lot more important than the incoming air temperature. High flow air filters in stock intake boxes/housings with smooth ducts works just as well as the high dollar kits that most people invest their money in. Another look, most newer vehicle's air filtration systems flow just as well as the aftermarket competitors, it has been proven. And, some just like the look??? | Cold air intakes are used in applications where the owner/operator feels that the vehicle will produce more power with an outside air charge. Huge misconception, cold air intakes do not produce more power, at least not power that you will feel in the seat of your pants. Most vehicles built today are set up pulling air in from the outside, not from the engine compartment. If you notice that the air filter housing/box is located on one side or the other of the engine compartment, and has ducting that goes through the inner fender. Thus, this is pulling in outside air. It seems that most aftermarket cold air intake kits include the ducting that is smooth, not ribbed or corrilated, this allows for less disruption of the airflow, which in most cases is a heck of a lot more important than the incoming air temperature. High flow air filters in stock intake boxes/housings with smooth ducts works just as well as the high dollar kits that most people invest their money in. Another look, most newer vehicle's air filtration systems flow just as well as the aftermarket competitors, it has been proven. And, some just like the look??? | ||
| + | |||
| + | Then there's the other line of thinking based on physics which states that for each 10* drop in air temperature going into the motor, power will pick up by 1%. This is because when the air is colder, it is more dense and therefore contains more oxygen. Of course, a tuner would have to compensate for more oxygen by jetting fatter to get the air/fuel mixture back to correct. I don't know much about EFI, being a carburetor guy, but I would think that a computer-controlled system would sense more oxygen and automatically richen the mixture. It just makes sense that if you are pulling in engine bay air which was just pulled through the radiator at 200* and you install a system to pull in (for instance) 100* air from the outside of the car, you have a 100* drop in air temperature which should equate to a 10% increase in power. On a 400 hp motor, this would work out to 40 hp. I would think any tuner in his right mind would jump at the chance to pick up a power increase like that just for running some tubing to the outside. I see these Honda guys all the time who install an aftermarket pipe and then terminate the air filter right behind the radiator in the engine bay. This is obviously monkey-see, monkey-do without any idea of what they're doing. Just money thrown away in my opinion. If they would simply extend the tubing to the outside of the car, they could take advantage of the colder ambient air and make more power. | ||
Your Privacy Choices