Building an inline 6 Chevy 250 engine
(→Intake manifolds) |
(→Cylinder heads) |
||
| Line 41: | Line 41: | ||
==Cylinder heads== | ==Cylinder heads== | ||
| − | The integrated intake head isn't well suited for performance duty. About all that can be done for a head with this intake, is the 1 barrel can be swapped for a 2 barrel by using an adaptor. Not the hot ticket. The lump port mods along with porting, larger valves, etc. can be done to ANY head, but without the ability to use a high performance intake, these mods would be largely wasted. | + | The integrated intake head used with the 250 (except the 292 which retained the separate intake) between 1975-1984 isn't well suited for performance duty. About all that can be done for a head with this intake, is the 1 barrel can be swapped for a 2 barrel by using an adaptor. Integrated intake cylinder heads had one-barrel carburetors until the 1979 model year (the light trucks with the 250 used a Rochester Varajet 2 barrel from 1979-84 which is not performance oriented. Not the hot ticket. The lump port mods along with porting, larger valves, etc. can be done to ANY head, but without the ability to use a high performance intake, these mods would be largely wasted. |
| − | Using the earlier head with the detachable intake from a 194, 230 or 250 cid inline Chevy 6 offers a much better platform. Because of the current lack of aftermarket support for inline Chevy 6 cylinder heads, the hotrodder is left with the removable intake head from the early/mid '70s as the best choice for performance use, unless the cost of a custom head can be justified. | + | Using the earlier head (or one from a 1975-1990 tall deck 292) with the detachable intake from a 194, 230 or 250 cid inline Chevy 6 offers a much better platform. Because of the current lack of aftermarket support for inline Chevy 6 cylinder heads, the hotrodder is left with the removable intake head from the early/mid '70s as the best choice for performance use, unless the cost of a custom head can be justified. |
In the past there were heads made for the Chevy 6. Now there are one-off heads for the Chevy inline 6 that have been made from 2 SBC aftermarket aluminum heads that have been divided and welded back together. | In the past there were heads made for the Chevy 6. Now there are one-off heads for the Chevy inline 6 that have been made from 2 SBC aftermarket aluminum heads that have been divided and welded back together. | ||
Your Privacy Choices