Ford engine specifications
(Updated 351W information) |
|||
| Line 116: | Line 116: | ||
A basic Windsor engine design but with a higher deck height with thicker cylinder walls. | A basic Windsor engine design but with a higher deck height with thicker cylinder walls. | ||
| + | |||
| + | There is some discussion about early 351W engines being stronger due to higher nickel content. This writer has researched that and so far information found including a FoMoCo statement, it has turned out to be a myth though have still sought the earlier, '71-73 engines, just in case it's true. | ||
| + | |||
The bore spacing and bore diameter between the 351 and the 302/5.0 remains the same at 4.38" and 4.00" respectively. | The bore spacing and bore diameter between the 351 and the 302/5.0 remains the same at 4.38" and 4.00" respectively. | ||
A safe overbore is .030, but some blocks will allow more - before boring beyond .030, the block should be sonic tested for thickness | A safe overbore is .030, but some blocks will allow more - before boring beyond .030, the block should be sonic tested for thickness | ||
Your Privacy Choices