The FREE T Bucket plans
(→Steering assembly) |
|||
| Line 139: | Line 139: | ||
If you are using some suppliers spindle assemblies you may have to ream the existing bolt hole for proper tie rod assembly. These reamers can be purchased from Speedway. | If you are using some suppliers spindle assemblies you may have to ream the existing bolt hole for proper tie rod assembly. These reamers can be purchased from Speedway. | ||
| − | A word of note here - Total Performance makes probably the most long lived and most popular T-bucket but there is one significant design flaw that they continue to produce. The sleeve that connects the steering box (Corvair) to the steering shaft is extremely weak and can split. This sleeve has two milled slots and is in a shear failure mode with the rolled drive pin. In this writer's experience, besides his own component failure, knows of two additional in my area alone. The steering column sleeve should be discarded and a u-joint substituted. You can either mill flats on the supplied shaft and use a DD u-joint, have splines cut on the shaft and uses a splined joint or (though not recommended) use a racing style (TIG/MIG) weld on u-joint | + | A word of note here - Total Performance makes probably the most long lived and most popular T-bucket but there is one significant design flaw that they continue to produce. The sleeve that connects the steering box (Corvair) to the steering shaft is extremely weak and can split. This sleeve has two milled slots and is in a shear failure mode with the rolled drive pin. In this writer's experience, besides his own component failure, knows of two additional in my area alone. The steering column sleeve should be discarded and a u-joint substituted. You can either mill flats on the supplied shaft and use a DD u-joint, have splines cut on the shaft and uses a splined joint or (though not recommended) use a racing style (TIG/MIG) weld on u-joint, this failure has been corrected by Total Performance in their newer kits, the sleeve has been replaced with a u-joint though it is a weld on. |
==Bracing and mounting the Body== | ==Bracing and mounting the Body== | ||
Your Privacy Choices