How to identify a Ford V8
Crashfarmer (Talk | contribs) (→4.6 liter) |
|||
| Line 9: | Line 9: | ||
32-36,water pumps located at the front of each head, upper radiator hoses attach to water pumps. | 32-36,water pumps located at the front of each head, upper radiator hoses attach to water pumps. | ||
| − | 37, water pumps moved to the front of the block, upper radiator | + | 37, water pumps moved to the front of the block, upper radiator attach at outlet in center of heads. 1937 engines may run the earlier water pump heads and use "block-off plates" in place of the pumps in the block. |
| − | 32-36, poured main bearings | + | 32-36, poured main bearings until October 1935 when an inserted main bearing engine was introduced. Both poured and inserted styles were available through 1936. Some inserted engines were stamped "LB" but many were not; there is no sure external way to identify them and many "stamped" engines are bogus. The oil pan must be removed and mains inspected. 37 blocks have insert mains. |
front mounted distributor driven directly off the camshaft, coil mounted in distributor with 3 screws 32-36 early, two screws at angle 36 late, 2 screws side to side 37 | front mounted distributor driven directly off the camshaft, coil mounted in distributor with 3 screws 32-36 early, two screws at angle 36 late, 2 screws side to side 37 | ||
Your Privacy Choices